|Inlet Switch Port||1/4"BSPT|
|Cooling Capacity||1000-2800 Btu/hr|
|Magnetic Base Size||DN80|
We are the Manufacturer, Supplier and Trader for Vortex Tube Cooler
.These product so much good in quality and economical as compare to other European or American brand.
A Vortex Tube is a device with no moving parts that will convert ordinary stream of compressed air into two streams - one hot and one cold. A Vortex Tube can produce cold air down to - 50°F and hot air up to 260°F.
Compressed air is injected circumferentially into the tube at sonic speed and creates a cyclone (Vortex) spinning at a million revolutions per minute. Part of the air is forced to spin inward to the center hole and travels up the long tube where a valve turns the spinning column (Vortex) of air inside itself. The inside column of air gives up its heat to the outside column. The cold air is directed out the cold end of the Vortex Tube and the hot air is exhausted out of the other end of the Vortex Tube. The temperature and airflow is totally controllable by adjusting the knob on the hot end of the Vortex Tube.
Product Prices may varies according to requirement.
Uses For Vortex Tubes:
Cool Machine Operation
Cool Electrical Cabinets
Cool Mold Tools
Cool Sewing Needles
Cool CCTV Cameras
Set Hot Glue Operations
Thermal Cycle Parts
Cool Gas Samples
Cool Heat Sealing
- Pay Mode Terms: T/T (Bank Transfer),D/P,D/A